C-292-8-B (This single pattern high lift, high duration camshaft is recommended for Street/Strip Ford 200,250

  This single pattern high lift, high duration camshaft is recommended for Street / Strip Applications. It offers excellent mid and upper range performance, and can be used with automatic transmissions with high stall converters, or manual...

7 Degree 5/16 Std Height 24pcs

7 Degree 5/16 Std Height Clay Smith Valve Locks are stamped from the finest alloy steel and heat treated to a maximum strength to ensure against failures  

5/16 Teflon P.C. Valve Seals .500 x .312 Stem 12pcs

5/16 Teflon P.C. Valve Seals .500 x .343 Stem 12pcs Teflon P.C. Seals have a spring loaded wiper to remove excess oil Clay Smith Performance Valve Guide Seals are manufactured from premium materials and designed to LAST!

ARP-200-HBK ARP Head Bolt Kit (144/170/200/250)

Head Bolt Kit for all 170/200/250ci motors. The 28 piece set includes Bolts & Washers.ARP® Bolts and Studs are approximately ten times stronger than OEM fasteners. For most performance applications, studs are recommended over bolts. Studs make...

ARP-200-HSK ARP Head Stud Kit (144/170/200/250)

Head Stud Kit for all 144/170/200/250ci motors. The 42 piece set includes studs, washers and nuts. ARP® Bolts and Studs are approximately ten times stronger than OEM fasteners. For most performance applications, studs are recommended over...

Ford Inline 6 cylinder 5/16" Steel Valve Spring Retainer

These custom made one piece retainers work with all of our valve springs (single, single with damper, or dual spring), as well as the stock OEM Springs. The retainers are heat treated , then Black Oxide coated to prevent rust and corrosion...

Ford 6 Cylinder 144/170/200/250 Melling Oil Pumps * see drop down

Using the chart below, determine which oil pump you need for your application and year, then select the Pump # from the Drop Down Options M65,  M65-A,  M65-B, or M82    Pump # All...

Cam Bearing Set - 144/170/200/250ci

Cam bearings will be of high quality material Clevite or Sealed Power or King  This 4 piece Cam Bearing Set. Fits all 144/ 170/200/250 ci motors (all years).  

Stock Replacement Timing Chain Only

High quality replacement timing chain (chain only), fits all 144/170/200ci engines with a stock timing set.  We normally stock Clevite chains, but we may substitute with Melling, Cloyes, or Seal Power  if  the...

CSC-TOY-SPG Dual Valve Springs

  Suitable for most after-market performance cams, these dual springs are recommended for high reving engines, and/or high ratio rocker arms.  These springs offer increased rates for elimination of valve float at higher RPM's,...

CSC-200-PIN Camshaft Dowel Pin

 This pin is used to align the cam timing gear on the camshaft. Fits all small six cams (144/170/200/250ci). While the old pin can be removed with a pair of channel locks and re-used, old pins can shear off if the motor is making a lot of...

C-292-12-B (This single pattern high lift, high duration camshaft is recommended for turbo charged application Only)Ford 144,170,200,250

This single pattern high lift, high duration camshaft is recommended for turbo charged applications only with multi-point fuel injection. It offers excellent mid and upper range performance, and can be used with automatic transmissions with high...