HR-9299-8-CSR - SBC 377-390 - CID E-210 and Victor 215cc Head - Hydraulic Rollers Camshaft

Chevrolet - Small Block - Hydraulic Rollers Camshaft - Grind #HR-9299-8-CSR
Max Power 6000 rpm Peak torque 3500

• SBC 377-390 CID E-210 and Victor 215cc Head
• This cam was designed for 1.5 or 1.6 ratio to be used with the Eddy heads.
• The increased lifter velocity maximizes the fill rate of these heads on large stroke engines from 3.75 to 4.00”.
• The cam will maximize RAM Effect and fill cylinder for increase VE.  
• Use of 1.750” on engines up to 412CID and 1.875” on engines over 412 CID is highly recommended.
• We recommend a 3200 stall. We recommend a 850CFM carb and a minimum of 10 to 1

Download and Print your Cam Specification Card (PDF) - Click Here

Clay Smith Cams recommends degreeing your Camshaft in on the #1 Intake using the Lobe Centerline Method.

Find our Best-Selling Degree Kit here.

If you need help degreeing in your camshaft, please feel free to call our Tech Line at 714-523-0530.

*Some parts are not legal for use in California or other states with similar laws/regulations.