Description
Chevrolet - Big Block - Hydraulic Flat Tappet Cam - Grind #H-280-8-BH
- Computer-Controlled Compatible: No
- Valve Springs Required: Yes
- Always Check Valve to Piston Clearance
- Always Install New Lifters with Flat Tappet Camshafts
This Hydraulic camshafts feature a straight profile, and is designed for use with hydraulic flat tappet lifters. The tight lobe separation will boost your torque, throttle response, and mid range power.
Download and Print your Cam Specification Card (PDF) - Click Here
Clay Smith Cams recommends degreeing your Camshaft in on the #1 Intake using the Lobe Centerline Method.
Find our Best-Selling Degree Kit here.
If you need help degreeing in your camshaft, please feel free to call our Tech Line at 714-523-0530.
*Some parts are not legal for use in California or other states with similar laws/regulations.
Additional Information
Cam Type: |
Hydraulic Flat Tappet |
Make: |
Big Block Chevrolet |
Usage: |
Street/Strip - Marine |
Intake Duration @ .050: |
231 |
Exhaust Duration @ .050: |
231 |
Lobe Center: |
108 |
Valve Lift with Factory Rocker Arm Ratio: |
.535 int / .535 exh |
Valve Springs Required: |
Yes |