Product Description
"WOODS" PARKO COATED FLYWEIGHTS ADDS ANOTHER LAYER OF ANTI WEAR PROTECTION ON THE FLYWEIGHT
PARKO COATING IS A "LUBRAPLATING" PROCESS WE USE @ CLAY SMITH CAMS
NIC WOODS FEELS "PARKO COATING" IS A MUST!!!
C4-42 FLYWEIGHT CAN BE USED IN LIGHT 7.90 3.650+3.750 BORE (535-600 lbs.)
** ALSO KEEP IN MIND IF YOU'RE RUNNING C4-42 at sea level, and you go to a high ALTITUDE track such as anywhere in Colorado or say Bristol. (4000 DA OR HIGHER) you may want to make sure you have a set of the C4-40 to relieve the engine of load !!
MUST RUN "WOODS" PURPLE PRIMARY SPRING AND WOODS "ORANGE" DRIVEN SPRING
AND
-
Shim count:
-
NIC WOODS RECOMMENDS 3 shims .031 EACH (soft application) AS A BASELINE
-
4 shims (med application),
-
5 shims (hard application)
