Description
Chevrolet - Big Block - Solid Flat Tappet Cam - Grind #C-310-8-B
- Good Exhaust System Needed
- High Compression
- Normally or Forced Aspirated
- Always Check Valve to Piston Clearance
- Valve Springs Required: Yes
- Always Install New Lifters with Flat Tappet Camshafts
Download and Print your Cam Specification Card (PDF) - Click Here
Clay Smith Cams recommends degreeing your Camshaft in on the #1 Intake using the Lobe Centerline Method.
Find our Best-Selling Degree Kit here.
If you need help degreeing in your camshaft, please feel free to call our Tech Line at 714-523-0530.
*Some parts are not legal for use in California or other states with similar laws/regulations.
Additional Information
Cam Type: |
Solid Flat Tappet |
Make: |
Big Block Chevrolet |
Usage: |
Marine |
Intake Duration @ .050: |
270 |
Exhaust Duration @ .050: |
270 |
Lobe Center: |
108 |
Valve Lift with Factory Rocker Arm Ratio: |
.620 int / .620 exh |
Valve Springs Required: |
Yes |
