Description
This single pattern high lift, high duration camshaft is recommended for Street / Strip Applications. It offers excellent mid and upper range performance, and can be used with automatic transmissions with high stall converters, or manual transmissions. Lopey idle, marginal vacuum, must verify valve spring coil bind. Base circle may be smaller and require longer pushrods
Clay Smith Cams are made in the USA from the highest quality cores available
| Ford 6 CylinderPart # 17-016144, 170, 200, 250 | ||
|
Grind # C-292-8-B |
AdvertisedNumbers | Numbers@ .050 |
|
Intake Duration |
292 |
240 |
|
Exhaust Duration |
292 |
240 |
|
Lobe Center |
108 |
108 |
|
Center line Timing Events |
106 INT |
110 EXH |
|
Intake Valve Opens/ Closes |
14 @.050 |
46 @ .050 |
|
Exhaust Valve Opens/ Closes |
50 @ .050 |
10 @ .050 |
| Valve LiftBased on 1.6 Rocker Ratio |
.520 INT |
.520 EXH |
|
Valve Lash (Hot) |
.018 |
.018 |
|
Set Springs up at _____lbs Seat Pressure |
||
| CSC recommends degreeing your Camshaft in on the #1 Intake using the Lobe Center line Method. If you need help to degree in your camshaft, please feel free to call or visit us at:www.claysmithcams.comTech Line 714-523-0530 | ||
