Description
Ford - 272, 292, 312 Y-Block - Solid Flat Tappet Cam - Grind #81-051
Download and Print your Cam Specification Card (PDF) - Click Here
• Manual Transmission or high, stall is recommended or lower rear end gears.
* Ford-o-Matic NOT recommended
• Healthy idol and exhaust
• RPm Rangę 2500-6200
Clay Smith Cams recommends degreeing your Camshaft in on the #1 Intake using the Lobe Centerline Method.
Find our Best-Selling Degree Kit here.
If you need help degreeing in your camshaft, please feel free to call our Tech Line at 714-523-0530.
*Some parts are not legal for use in California or other states with similar laws/regulations.
*CAMS WITH MORE THAN .450" LIFT REQUIRES CUTTING VALVE GUIDES FOR ADDITIONAL RETAINER TO SEAL CLEARANCE.
** CLAY SMITH CAMS ALWAYS RECOMMENDS CHECKING YOUR VALVE TO PISTON CLEARANCE !
Videos
View AllClose
Additional Information
Cam Type: |
Solid Flat Tappet |
Make: |
Ford |
Usage: |
RV/Tow - Street/Strip |
Intake Duration @ .050: |
236 |
Exhaust Duration @ .050: |
236 |
Advertised Intake Duration: |
284 |
Advertised Exhaust Duration: |
284 |
Lobe Center: |
108 |
Valve Lift with Factory Rocker Arm Ratio: |
.462 int / .462 ext |
Computer-Controlled Compatible: |
No |
Valve Springs Required: |
Yes |
Engine: |
272, 292, 312 Y-Block |
