Description
Hydraulic Flat Tappet Camshaft
This Hydraulic camshafts feature a straight profile, and is designed for use with hydraulic flat tappet lifters. The tight lobe separation will boost your torque, throttle response, and mid range power for exciting action at the track and on the road. A true, race type grind, that sacrifices some low-end punch for the more top-end performance, Works best with 2,800 plus Stall, and higher compression and gearing.
- Low vacuum, canister or pump recommended
- Computer-Controlled Compatible: No
- Valve Springs Required:Yes
- Recommended Higher Stall Converter
- Larger CFM Carburetor
- Exhaust
- Cylinder Head Modifications would be beneficial
- 290 Advertised Duration
- 236 Duration @.050
- Pick your Lobe Center
- Lift Base on Rocker Ratio
- 1.5 .469
- 1.6 .500
- 1.75 .542
- Always Check Valve to Piston Clearance
- Always Install New Lifters with Flat Tappet Camshafts
- Some parts are not legal for use in California or other states with similar laws/regulations
Additional Information
Cam Type: |
Hydraulic Flat Tappet |
Usage: |
Circle Track - Street/Strip - Marine |
Make: |
AMC |
Make: |
Buick |
Make: |
Chrysler / Mopar |
Make: |
Ford |
Make: |
Oldsmobile |
Make: |
Pontiac |
